| 75BNR10STSULP3 NSK Super Precision Bearings | Appropriate Hydraulic Nut:HMV96; Weight:22.50 Kg; b:25 mm; Ro:Rc 1/8; d1:440.00 mm; Thread D12:Tr480x5; Appropriate Withdrawal Nut No.:HML96; t:14.0 mm; e:8.5 mm; L1:153 mm; |
| 7224CTRSUMP3 NSK Super Precision Bearings | A1:12 mm; s1:26.9 mm; Db2:70 mm; Thread grub screw G2:M6x0.75; N:11.5 mm; Db1:65 mm; B1:44.4 mm; Recommended tightening torque for grub screw:4 N·m; T:45.9 mm; Basic static load rating C0:7.8 kN; J:99 mm; d:25 mm; Recommended diameter for attachment bolts, mm G:10 mm; Recommended diameter for attachment bolts, inch G:0.375 in; R1:20.5 mm; Fatigue load limit Pu:0.335 kN; RG:1/4-28 UNF; Housing material:Cast iron; |
| 7020CTRDUDMP3 NSK Super Precision Bearings | Design Units:Imperial; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2080 lbf; R - Cone Backface To Clear Radius1:3.560 mm; db - Cone Backface Backing Diameter:42.42 mm; Da - Cup Frontface Backing Diameter:63.00 mm; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):18; Y - ISO Factor9:1.57; Db - Cup Backface Backing Diameter:58.93 mm; Series:14000; Cg - Geometry Factor:0.0668; |
| 75BER10XTV1VSUELP3 NSK Super Precision Bearings | A2:228.6 mm; Da:180 mm; P60°:136 kN; Ca:55.804 mm; RG:3/8 NPT; h:39.688 mm; H1:114.3 mm; H2:44.45 mm; Cap bolt recommended tightening torque:203.4 N·m; J min.:295.275 mm; N1:25.4 mm; P120°:50.7 kN; J max.:333.375 mm; Cap bolt, SAE grade:5; Initial grease fill:181.44 g; End plug (suffix Y):EPR 14; Housing:SAF 024 KA; Taconite seal:TER 113; R2:30.163 mm; Appropriate attachment bolt size G:0.875 in; |
| 7228CTRDUMP3 NSK Super Precision Bearings | Dimension C:6.00 in; Dimension E:7.75 in; Dimension F:9.97 in; Oil Lubrication - B/C/O Seal:900 rpm; Dimension R:0.37 in; Dimension M:2.96 in; Float:0.083 in; UPC Code:0883450068420; Eng Internal Radial Clearance - Max:0.0047; Locking Style:Eccentric; Grease Lubrication - T Seal:1600 rpm; C - Dynamic Load (Basic):97700 lb; Dimension L Exp:5.05 in; Pre Install Clearance Max:0.0047 in; Dimension J (Bolt Size):0.875 in; |
| 7021CTRSULP3 NSK Super Precision Bearings | Thread grub screw G2:M6; Hexagonal key size for grub screw N:3 mm; s1:24.3 mm; H1:47.6 mm; L:160 mm; A5:22 mm; Fatigue load limit Pu:0.655 kN; B1:39.5 mm; J min.:119 mm; N4:4 mm; Limiting speed:1100 r/min; Recommended diameter for attachment bolts, inch G:0.5 in; N:21 mm; N1:14 mm; Mass bearing unit:1.55 kg; J max.:133 mm; Recommended tightening torque for grub screw:7.4 N·m; Housing material:Cast iron; |
| 7932CTRDUMP3 NSK Super Precision Bearings | C0 Static Load Rating:1060; Locating Rings (width x OD):SR250X15; H:302 mm; G:M30; A:205.00 mm; Adapter Sleeve1:HE3128; Bearing:22228K; Jmax:427 mm; N1:42.00 mm; C1 Dynamic Load Rating:863; Max Grease Speed:2200; Housing Mass:39 Kg; H1:150.0 mm; A3:263 mm; Shaft Diameter d:5 in; L:500 mm; H2:50.0 mm; Max Oil Speed:2600; Seal:TA528/ 5; Jmin:413 mm; |
| 7928CTRDULP3 NSK Super Precision Bearings | Dimension C:4.19 in; Grease Lubrication - T Seal:2000 rpm; Dimension N:2.7500 in; Dimension H:1.00 in; C - Dynamic Load (Basic):66900 lb; Dimension L:3.61 in; Dimension D:7.480 in; Oil Lubrication - T Seal:2400 rpm; Dimension F:8.35 in; Dimension A:11.12 in; Dimension E:6.68 in; Eng Internal Radial Clearance - Max:0.0047; Oil Lubrication - B/C/O Seal:1100 rpm; Grease Lubrication - B/C/O Seal:1100 rpm; |